DEI 50211 ATAC Spray-On Coating Features:

• Reflects Heat to 375 Degrees F
• Hi-tech ceramic sphere technology dampens outside noise & vibration
• Ideal for small jobs or touch-up
• Non-toxic
• Water soluble
• Easy-to-use aerosol spray
• Expected Coverage: 12 sq. ft.
• Adheres to metal, fiberglass, and plastic

DEI 50211 ATAC Spray-On Coating Notes:

• Surface should be clean and free from oil, grease, wax, and contaminants
• Rust should be removed or treated
• Bare metal should be primed using DEI red oxide primer 50297 or equivalent (sold separately)
• Painted surfaces should be sanded prior to applying
• Do not apply in temperatures below 60 Degrees F (Do not let freeze)

DEI 50211 ATAC Spray-On Coating Application Procedure:

• Shake can well before use
• Spray can upside down until nozzle clears for storage
• Test in a small area
• Galvanized surfaces must be primed
• Apply uniform wet coat of 12-16 mill
• A second coat can be applied if needed
• Allow 12 hour dry time between coats
• Allow 24 hours @ 70°F to cure before covering with any materials or applying heat from engine/exhaust systems
• High-humidity and lower temperatures may increase dry time
• Do not force dry with heat
• Cleans up easily with hot water and soap