Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Vehicle Info NeededFLOWMASTERPART NUMBER: 389-17289
American Thunder Header-Back Exhaust System 1966-1967 Ford Fairlane
$99995
1 left in stock
Ships Today
Lowest Price GuaranteeFord Fairlane
American Thunder Header-Back Exhaust System1966-1967 Ford Fairlane 2.5" Tubing 3" Polished SS Tips Dual Rear Exit Super 50 Series Muffler Aluminized Steel
FLOWMASTER MUFFLERS 17289 Features:
The American Thunder crossmember-back exhaust system for the 1966-1967 Ford Fairlane is constructed from 2.50-inch mandrel-bent 16 gauge aluminized steel tubing to maximize the exhaust flow and comes complete with an H-pipe crossover to equalize the exhaust pressures and eliminates backrap on deceleration. The large case Super 50 Series performance mufflers provide a deep powerful sound and maximum performance flowing into the mandrel-bent tailpipes. The Super 50 mufflers also incorporate built-in resonators keeping the interior resonance down to a minimum. The system is finished off with large 3.00-inch angle polished stainless steel tips and includes all necessary parts, hardware and instructions to complete the installation. All aluminized steel exhaust systems are covered by our 3-year Limited Warranty.- H-pipe Crossover for Maximum Power and Deep Tone
- Super 50 Series Mufflers for Deep Powerful Sound
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Includes Hangers and Hardware for Installation
- Moderate to Aggressive Exterior Exhaust Tone
- Crossmember-back True Dual Exhaust System
- Does Not Include Header Reducers or Downpipes for Factory Manifolds
- Minimal Interior Resonance
Part TypeExhaust System
BrandFLOWMASTER
Package Height15.5
Package Width18.0
Package Length50.0
Weight83.9 PG
Tailpipe Diameter (In.)2.5
Muffler Inlet Inside Diameter2.50 in.
Hangers IncludedYes
Main Piping Diameter2.50 in.
Tail Pipe QuantityDual
Inlet TypeWeld-On
Tip CutSlant
Exhaust Tip Material304 Stainless Steel
Catalytic Converter Quantity0
Exit LocationSplit Rear
Inlet QuantityTwo
Muffler Body Length17 in.
Sound LevelModerate
Muffler Body MaterialAluminized Steel
Exhaust Tip CutAngled
Gasket Or Seal IncludedNo
Exhaust Tip IntercooledNo
Pipe ColorSilver
System FinishAluminized
Muffler Quantity2
Muffler Inlet Outside Diameter2.63 in.
Exit QuantityTwo
Tip MaterialStainless steel
Muffler Flanged OutletNo
Tip Quantity2
Exhaust Tip ResonatedNo
Exhaust TypeDual
Catalytic Converter IncludedNo
Heat Shield IncludedNo
Part CategoryPerformance Parts
Hardware IncludedYes
Exhaust Tip Quantity2
Exhaust Tip FinishPolished
Exhaust Tip EdgeSlash Cut
Valve IncludedNo
Muffler TypeChambered
Pipe MaterialAluminized Steel
Tail Pipe Tapered OutletNo
Muffler Body ShapeOval
Mounting Bracket IncludedYes
Muffler Outlet Quantity1
Muffler FinishBlack High-Temperature Paint Finish
Inlet Diameter2.50 in.
Clamps IncludedYes
Muffler StyleChambered
Tip Outlet Size3 in (76.2 mm)
FinishAluminized
Exit StyleDual Out Rear
Tip IncludedYes
Clamping TypeFlat Band
Muffler Flanged InletNo
Spring Bolt Kit IncludedNo
Muffler SeriesSuper 50 Series
QuantitySold as a kit
Muffler IncludedYes
Exhaust Tip ConnectionWelded
System StyleHeader-back
Tail Pipe Outlet Outside Diameter2.50 in.
Muffler ConfigurationSingle inlet/Single outlet
System MaterialSteel
Valve TypeNot Applicable
Tip Edge StyleNon-rolled edge
Tip ShapeRound
Intermediate Pipe Diameter2.5 in (63.5 mm)
Exhaust Tip Diameter3 in.
Part FitmentDirect Fit
Vendor Part Number17289
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
