
Performer Power Package for 400ci Small Block Chevy
- Intake Manifold, Carburetor and Camshaft Kit
- Small Block Chevy 400ci 1968-1980
- 4-bbl Square-Bore Carb Flange (non-EGR)
- Idle-5500 RPM Range
- Designed for street 1968-80 400ci and 1955-1986 262-350ci Chevrolet small-block V8s.
- Not for 1987 and later cast iron or Chevy Bowtie heads.
- Will fit 1987 and later stock aluminum heads.
- Has provisions to add oil fill tube.
- Performers accept late-model choke, waterneck, air-conditioning, alternator and H.E.I.
- This intake is a stock replacement/street legal part for 302, 327 and 350ci V8s with OEM or Edelbrock (350-1400) 4-bbl. carb.; 1966-72 (1973 non-California) passenger cars, 1966-83 trucks and Suburbans; except stock equipped EGR. Intake p/n 350-3701 is stock replacement/street legal part for 305, 350 and 400 V8s with OEM 4-bbl. or Edelbrock p/n 350-1400 carb. 1972-86 and GM corporate engines with 350 V8s; 1981-86.
Power Package includes matching:
- Performer Intake Manifold 350-2101
- Edelbrock Performer 600cfm Carburetor 350-1406
- Performer-Plus Hydraulic Flat Tappet Camshaft & Lifters 350-2103
Installation Notes:
- Port exit dimensions: 1.14' x 1.88'
- Recommended intake gasket: Edelbrock 350-7201
- Manifold height: (A) 3.50' , (B) 4.60'; Carb pad height = 4.05'
- View Manifold 'A/B' Measurement Guide.
- Use EGR adapter 350-8035 to adapt clamp-on EGR valve.
- Choke plate 350-8901 is included.
Carburetor Recommendations:
OEM Rochester Quadrajet 4-bbl.
- carb will work with non-EGR system
- carb has provision for evaporative canister
- carb acceptable to factory cruise control
- use Automatic Divorced Choke Rod 350-9171 and throttle bracket 350-8036 for 1972-78 vehicles
Edelbrock Performer 600cfm Carburetor 350-1400.
- carb will work with EGR system
- carb has provision for evaporative canister
- carb acceptable to factory cruise control
- use throttle bracket 350-8036 for 1972-78 vehicles
Edelbrock Performer 600cfm Carburetor 350-1405.
- carb will work with non-EGR system
- carb has no provision for evaporative canister
- requires 350-8008 or 350-8024 stud, nut & washer kit
- carb acceptable to factory cruise control
- carb has manual choke only
- use throttle bracket 350-8036 for 1972-78 vehicles
Edelbrock Performer 600cfm Carburetor 350-1406.
- carb will work with non-EGR system
- carb has no provision for evaporative canister
- carb acceptable to factory cruise control
- use throttle bracket 350-8036 for 1972-78 vehicles
Edelbrock Thunder Series AVS 650cfm Carburetor 350-1905.
- carb will work with non-EGR system
- carb has no provision for evaporative canister
- requires 350-8008 or 350-8024 stud, nut & washer kit
- carb acceptable to factory cruise control
- carb has manual choke only
- use throttle bracket 350-8036 for 1972-78 vehicles
Edelbrock Thunder Series AVS 650cfm Carburetor 350-1906
- carb will work with non-EGR system
- carb has no provision for evaporative canister
- carb acceptable to factory cruise control
- use throttle bracket 350-8036 for 1972-78 vehicles
Cam Specs:
- Designed for optimum torque from the low-end to the mid-range.
- They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s.
- You can expect a major improvement in throttle response and torque.
*Note: 50-state legal for 1968-80 400ci Small Block Chevy.
Duration Advertised: 288° Intake / 288° Exhaust Duration @ .050' Lift: 214° Intake / 214° Exhaust Valve Lift: .442' Intake / .442' Exhaust Lobe Separation Angle: 112° Open/Close @.050' Cam Lift: Intake - 0° ATDC (opens) / 34° ABDC (closes)
Exhaust - 44° BBDC (opens) / 10° BTDC (closes)Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
![Intake Manifold Gasket Set for Small Block Chevy [Port Size: 1.280 in. x 2.090 in.]](https://www.jegs.com/images/mini_200/500/555/555-210001.jpg)


